Pre-finished Pre-finished flooring is solid or engineered wood flooring that has a factory finish applied. This form of finishing gives the wood a harder finish compared to sand a finish floor. The advantage of this flooring is that installation generates less dust, noise and requires less time. You can also walk on the floor as soon as it is installed.
Sand and finish Sand and finish flooring is a process in which unfinished solid hardwood is installed, then sanded and finished on site. With this option you have more flexibility in design, stain colour, sheen and choice of species.
No other flooring offers the warmth, beauty, and value of wood. Wood flooring enhances the decor of any room, and provides timeless beauty that will increase in value throughout the years. In fact, in a national survey of real estate agents, 90 percent said that houses with wood flooring sell faster and for higher prices than houses without wood floors. That's money in your pocket!
Maintenance of today's wood floors is easy! New technology in stains and finishes call for regular cleaning that takes little more than sweeping and/or vacuuming, with occasional use of a professional wood floor cleaning product. You will want to use a cleaning product recommended by your flooring manufacturer, installer, or other wood flooring professional. This will ensure that you use the proper cleaner for your type of flooring and finish.
Once you've decided to install or refinish a wood floor, you may wonder what will happen next. Knowing what to expect before, during, and after the work takes place will help ensure a high-quality job.
Before work begins, remove all furnishings, draperies, paintings, and other items from the room. Flooring professionals typically are not insured against damages to these items, so removal will be your responsibility. For new installations, the wood will need to acclimate, which will vary from two days to two weeks.
If your floors are being sanded, finished or refinished, be prepared for some noise and disruption. Dust containment systems can minimize debris, but no system is 100% effective, so cover any items that you want to keep dust-free. When the finish is applied, stay off your floors until it has dried. The time required will vary depending on the type of finish used.
After the finish has dried, put felt pads on the bottoms of any furniture to minimize scratches and dents. Place scatter rugs at all entrances, avoiding those with rubber backs, which can discolor your floor. Avoid walking on your floors with cleats or high heels in disrepair.
Keep in mind that no two floor boards will be identical. Variations in appearance are completely normal. As your floor ages, some color change can occur. This also is normal, but can be minimized by limiting exposure to direct sunlight, and periodically moving furniture and rugs. Cracks are normal as well, and will appear and disappear between floor boards during seasons of high and low humidity. Generally, anything less than the width of a dime is considered normal, and will correct itself as seasons change. Flooring inspectors recommend inspecting the floor from a standing position in normal lighting to identify irregularities.
Finally, keep your wood floors looking their best by properly maintaining them. Use a cleaning product recommended for your floors and use it regularly to keep them looking beautiful for years to come.
With today's advances in wood flooring stains and finishes, cleaning your wood floors has never been easier. Regular maintenance requires little more than sweeping with a soft bristle broom, and vacuuming with a soft floor attachment if your wood floor includes a beveled edge that could collect debris. You also should clean your floors periodically with a professional wood floor cleaning product recommended by a wood flooring professional.
There are other steps you can take to minimize maintenance and maintain the beauty of your wood floors as well.
Do not use sheet vinyl or tile floor care products on wood floors. Self-polishing acrylic waxes cause wood to become slippery and appear dull quickly.
Use throw rugs both inside and outside doorways to help prevent grit, dirt and other debris from being tracked onto your wood floors. This will prevent scratching.
Do not wet-mop a wood floor. Standing water can dull the finish, damage the wood and leave a discoloring residue.
Wipe up spills immediately with a slightly dampened towel.
Do not over-wax a wood floor. If the floor dulls, try buffing instead. Avoid wax buildup under furniture and other light traffic areas by applying wax in these spots every other waxing session.
Put soft plastic or fabric-faced glides under the legs of furniture to prevent scuffing and scratching.
Avoid walking on your wood floors with cleats, sports shoes and high heels. A 125-pound woman walking in high heels has an impact of 2,000 pounds per square inch. An exposed heel nail can exert up to 8,000 pounds per square inch. This kind of impact can dent any floor surface.
When moving heavy furniture, do not slide it on wood flooring. It is best to pick up the furniture completely to protect the wood flooring.
For wood flooring in the kitchen, place an area rug in front of the kitchen sink.
Use a humidifier throughout the winter months to keep wood movement and shrinkage to a minimum.
Information is courtesy of National Wood Flooring Association.
Have a question, comment, or a sales request? Send an email to sales@muflooring.com or head over to our contact page for more ways to get in touch.
©2010 MU Hardwood Flooring | Login
